KOMO VMC-50/160 VERTICAL MACHINING CENTER WITH TRAVELING COLUMN DESIGN

KOMO VMC-50/160 VERTICAL MACHINING CENTER WITH TRAVELING COLUMN DESIGN

Stock Number: 1176

KOMO VMC-50/160

Age: 1996

ADDITIONAL NOTES: IT HAS THE VARIABLE PALLET ZONE SYSTEM WHICH CAN NAME UP TO 4 USER DEFINED ZONES THAT THE MACHINE WILL NOT GO INTO IF PROGRAMMED CORRECTLY CHIP ENCLOSURE IS 98" TALL. THE FRONT HALF IS FACTORY AND THE BACK HALF IS HOMEMADE (CUSTOMER HAS IT UNDER A JIB CRANE THAT IS 12' 1" UNDE THE JIB AND IT COMPLETELY CLEARS THE MACHINE WITH ROOM TO SPARE EVEN WITH Z AXIS ALL THE WAY UP. THE OPERATOR CONSOLE IS ON A MOVEABLE STAND WITH WHEELS IN FRONT OF THE MACHINE. THE COLUMN DOES ALL OF THE TRAVELING, SO THE FOUNDATION UNDER THE MACHINE IS THE LIMIT TO THE WEIGHT ON THE TABLE. THE FOUNDATION DRAWING CALLS OUT FOR 6" MINIMUM WELL COMPACTED GRATED GRAVEL WITH 32" REINFORCED CONCRETE ON TOP, BUT CUSTOMER HAS IT ON 8" THICK FLOOR WITH 6" PACKED GRAVEL AND HAVE NEVER HAD ANY ISSUES. THE MACHINE HAS A VERY STRONG Z AXIS THRUST.

                                                              
Click to view larger photo

SpecificationDescription
X AXIS TRAVEL162"
Y AXIS TRAVEL32"
Z AXIS TRAVEL32"
TABLE SIZE160" x 32"
X, Y & Z RAPID TRAVERSE RATES600 IPM
X, Y & Z PROGRAMMABLE FEED RATES.001-250 IPM
SPINDLE MOTOR25 HP CONTINUOUS, 30 HP PEAK
SPINDLE SPEED3500 RPM
SPINDLE TAPERCAT 50 TAPER
TOOL MAGAZINERANDOM ACCESS WITH 30 TOOL CAP
WEIGHT63,000 LBS.
FLOOR SPACE31' 4" x 16' (FRONT TO BACK)
HEIGHT11' 10" TALL

Equipped With:
FANUC 16M CONTROL
400 TOOL OFFSETS
7 SETS OF WORK OFFSETS
LINEAR, CIRCULAR & HELICAL INTERPOLATION
ABSOLUTE AND INCREMENTAL PROGRAMMING
FEED RATE & RAPID OVERRIDE
BACKGROUND EDITING
RS232 PORT
MANUAL PULSE GENERATOR (NEW APPROX 3 YEARS)
CANNED CYCLES
REMOTE E-STOP, CYCLE START & FEED HOLD
RIGID TAPPING
NEW ROLLER PACKS IN Y & Z AXIS (APPROX. 3 YEARS)
THRU SPINDLE COOLANT WITH BALCRANK JET PULSER PUMP WITH APPROX 300 psi
DRAWBAR RETENTION KNOW IS COMMAND #RC6E-0001 FOR COOLANT THRU & RC6E-0002 FOR NON COOLANT THRU


HomeIndexContactView Cart


KOMO VMC-50/160 VERTICAL MACHINING CENTER WITH TRAVELING COLUMN DESIGN
PERFORMANCE MACHINE TOOLS LLC
3305 EDISON WAY
FREMONT, CA 94538
510.249.1000
510.249.9265
sales@permach.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com